hEARtest
Quick and simple hearing evaluation
新版本 2.2
Update for Android 15 (SDK 35)
Deprecation warning
Deprecation warning
This app can evaluate your hearing capabilities.
The term dB HL describes your hearing loss in decibels.
The table below shows a common way to classify hearing loss
(Source: Clark, J. G. (1981). Uses and abuses of hearing loss classification. Asha, 23, 493–500.)
Degree of hearing loss: dB HL range
Normal: –10 to 15
Slight: 16 to 25
Mild: 26 to 40
Moderate: 41 to 55
Moderately severe: 56 to 70
Severe: 71 to 90
Profound: 91+
First your earphones must be calibrated. You can either perform a full test which requires one or better several persons between the ages of 18 and 35 with normal hearing. Or you can perform a simple calibration at 1000Hz only (assuming good hearing at this frequency). In this case it is assumed that the earphones are linear across the frequency range and calibration values for the other frequencies are then calculated using the ISO226:2003 standard. Whenever you hear a beep simply touch the screen. You can pause / continue with a long click and speed up with a double click. If you have several persons available for calibration simply press "Add Calibration" and an average value of existing calibrations will be calculated. You may also delete the whole calibration.
After that you can perform tests and view them in test results.
You can then also perform tests at single frequencies. There you can manually select ear, frequency, and sound amplitude by clicking on the buttons.
Required permissions:
- Microphone
- External storage for backup/restore
No ads, no trackers.
The term dB HL describes your hearing loss in decibels.
The table below shows a common way to classify hearing loss
(Source: Clark, J. G. (1981). Uses and abuses of hearing loss classification. Asha, 23, 493–500.)
Degree of hearing loss: dB HL range
Normal: –10 to 15
Slight: 16 to 25
Mild: 26 to 40
Moderate: 41 to 55
Moderately severe: 56 to 70
Severe: 71 to 90
Profound: 91+
First your earphones must be calibrated. You can either perform a full test which requires one or better several persons between the ages of 18 and 35 with normal hearing. Or you can perform a simple calibration at 1000Hz only (assuming good hearing at this frequency). In this case it is assumed that the earphones are linear across the frequency range and calibration values for the other frequencies are then calculated using the ISO226:2003 standard. Whenever you hear a beep simply touch the screen. You can pause / continue with a long click and speed up with a double click. If you have several persons available for calibration simply press "Add Calibration" and an average value of existing calibrations will be calculated. You may also delete the whole calibration.
After that you can perform tests and view them in test results.
You can then also perform tests at single frequencies. There you can manually select ear, frequency, and sound amplitude by clicking on the buttons.
Required permissions:
- Microphone
- External storage for backup/restore
No ads, no trackers.
版本
雖然在下方可選擇下載 APK 檔案，但要留意這樣的安裝方式將不會收到更新通知，是一種較不安全的下載方法。建議您先安裝 F-Droid 用戶端使用。
下載 F-Droid-
此版本需要 Android 6.0 或更高的版本。
此套件包由 F-Droid 構建和簽署，並保證與此原始碼 Tarball 保持一致。
-
此版本需要 Android 6.0 或更高的版本。
此套件包由 F-Droid 構建和簽署，並保證與此原始碼 Tarball 保持一致。
-
此版本需要 Android 6.0 或更高的版本。
此套件包由 F-Droid 構建和簽署，並保證與此原始碼 Tarball 保持一致。
新版本 2.1
Code improvement
Fade-in / Fade-out
Fade-in / Fade-out
新版本 2.0
Upgrade for Android 14