Vario
Aircraft-like altimeter and variometer with GPS, terrain and barometer modes.
新版本 1.2.0
- Better calculation.
- Better default settings.
- Remove default lat, lon.
- Better default settings.
- Remove default lat, lon.
Aircraft altimeter and variometer instruments for your phone, for aviation
enthusiasts. Not for navigation use, just for fun!
Three altitude sources, cycled with the MODE button:
* GPS - altitude straight from the GPS receiver. Very coarse.
* MAP - ground (terrain) elevation below your position, from the Open-Meteo
elevation API (GLO-90). This is ground elevation, not height above ground.
* BAR - barometric altitude, computed from the pressure sensor in the
device and sea-level pressure (QNH) which is fetched from api.met.no.
Accurat and fast. QNH can be set manually if you do not want to give position
access.
The altimeter is the classic three-pointer 100s / 1000s / 10 000s layout with a
Kollsman window. Tap a dial to zoom in, tap again to zoom out. IMP/MET switches
between feet and metres. Long-press MODE or IMP/MET toggles a debug overlay
with a pressure strip chart in BAR mode.
Privacy:
* No accounts, no analytics, no ads, no crash reporting.
* Settings are stored on the device only.
* Coordinates rounded to four decimal places are sent to
api.met.no (QNH) and api.open-meteo.com (terrain elevation); those two
services see your IP address as well.
* Everything except the two QNH/elevation lookups is offline.
No Google Play Services, no proprietary libraries, no closed-source SDKs.
enthusiasts. Not for navigation use, just for fun!
Three altitude sources, cycled with the MODE button:
* GPS - altitude straight from the GPS receiver. Very coarse.
* MAP - ground (terrain) elevation below your position, from the Open-Meteo
elevation API (GLO-90). This is ground elevation, not height above ground.
* BAR - barometric altitude, computed from the pressure sensor in the
device and sea-level pressure (QNH) which is fetched from api.met.no.
Accurat and fast. QNH can be set manually if you do not want to give position
access.
The altimeter is the classic three-pointer 100s / 1000s / 10 000s layout with a
Kollsman window. Tap a dial to zoom in, tap again to zoom out. IMP/MET switches
between feet and metres. Long-press MODE or IMP/MET toggles a debug overlay
with a pressure strip chart in BAR mode.
Privacy:
* No accounts, no analytics, no ads, no crash reporting.
* Settings are stored on the device only.
* Coordinates rounded to four decimal places are sent to
api.met.no (QNH) and api.open-meteo.com (terrain elevation); those two
services see your IP address as well.
* Everything except the two QNH/elevation lookups is offline.
No Google Play Services, no proprietary libraries, no closed-source SDKs.
- 作者: Lars Falk-Petersen
- 授權條款: GNU Affero General Public License v3.0 or later
- 網站
- 原始碼
- 更新紀錄
- 建置詮釋資料
- 可重現建置狀態
捐助
版本
雖然在下方可選擇下載 APK 檔案,但要留意這樣的安裝方式將不會收到更新通知,是一種較不安全的下載方法。建議您先安裝 F-Droid 用戶端使用。
下載 F-Droid-
此版本需要 Android 7.0 或更高的版本。
此套件包由原開發者建置和簽署,並保證與此原始碼 Tarball 保持一致。





