Quiet Rebellion
Control your Bose QC Ultra 2 directly — no Bose app, no cloud, no account.
新版本 0.7
✨ New
- Self Voice Persistence toggle: control whether sidetone behavior persists across context changes (experimental).
🔧 Improvements
- Audio Source switch buttons stay tappable at all times; unavailable devices are dimmed instead of disabled, so the brief routing window isn't missed.
- Faster detection of when Audio Source switching becomes available again after a Multipoint or source-switch action.
- Added a tap-cooldown to prevent duplicate Audio Source switch commands from rapid taps.
✅
- Self Voice Persistence toggle: control whether sidetone behavior persists across context changes (experimental).
🔧 Improvements
- Audio Source switch buttons stay tappable at all times; unavailable devices are dimmed instead of disabled, so the brief routing window isn't missed.
- Faster detection of when Audio Source switching becomes available again after a Multipoint or source-switch action.
- Added a tap-cooldown to prevent duplicate Audio Source switch commands from rapid taps.
✅
Quiet Rebellion gives you full control over your Bose QC Ultra Headphones (2nd Gen) directly over Bluetooth — without the Bose app, without a cloud account, and without sending any data off your device.
It implements the BMAP protocol (Bose Messaging and Protocol), the same protocol the official app uses, accessed through the unauthenticated SETGET and START operators. No keys are extracted, no encryption is broken, no traffic is replayed.
Supported device
Bose QuietComfort Ultra Headphones (2nd Gen) — codename "wolverine"
Noise Control
- ANC level 0–10 (0 = full isolation, 10 = full awareness)
- Wind Block on/off
- Spatial Audio: Off / Room / Head
Sound
- 3-band graphic equalizer (Bass / Mid / Treble, –10 to +10 dB)
- Sidetone level (Off / Low / Medium / High)
- Self Voice Persistence toggle: keep sidetone behavior persistent across context changes (experimental)
Listening Modes
- Switch between Quiet, Aware, Immersion, Cinema
- Custom mode slots (up to 7 user profiles)
- Favourite modes — mark modes with ★, long-press any mode to toggle
Connections
- Multipoint on/off
- Switch active audio source between paired devices (names resolved from headphone memory)
- Enter Bluetooth pairing mode
Device Settings
- Auto Play/Pause (pause when headphones removed)
- Auto-answer calls
- Device rename
- Power off
Appearance
- Two built-in themes: Fresh & Clean (cyan) and Monochrome, each in Light and Dark
- Material You (Android 12+): colours follow your wallpaper
- Tap the settings icon (top right) to switch themes
System Integration
- Persistent foreground notification — connection stays alive when the app is in the background
- Notification actions: ANC toggle · Switch to [next mode] · Power Off
- Mode cycling respects your favourite list
Requirements
- Android 8.0+ (API 26)
- Bose QC Ultra Headphones (2nd Gen) already paired via Android Bluetooth settings
- The Bose app must not be running while this app is active (both hold the RFCOMM channel)
Privacy
No network access. No analytics. No accounts. All communication is local Bluetooth only.
Open Source
Source code: github.com/MadEyez/quietrebellion
Fork of the original aaronsb/bosectl protocol library.
It implements the BMAP protocol (Bose Messaging and Protocol), the same protocol the official app uses, accessed through the unauthenticated SETGET and START operators. No keys are extracted, no encryption is broken, no traffic is replayed.
Supported device
Bose QuietComfort Ultra Headphones (2nd Gen) — codename "wolverine"
Noise Control
- ANC level 0–10 (0 = full isolation, 10 = full awareness)
- Wind Block on/off
- Spatial Audio: Off / Room / Head
Sound
- 3-band graphic equalizer (Bass / Mid / Treble, –10 to +10 dB)
- Sidetone level (Off / Low / Medium / High)
- Self Voice Persistence toggle: keep sidetone behavior persistent across context changes (experimental)
Listening Modes
- Switch between Quiet, Aware, Immersion, Cinema
- Custom mode slots (up to 7 user profiles)
- Favourite modes — mark modes with ★, long-press any mode to toggle
Connections
- Multipoint on/off
- Switch active audio source between paired devices (names resolved from headphone memory)
- Enter Bluetooth pairing mode
Device Settings
- Auto Play/Pause (pause when headphones removed)
- Auto-answer calls
- Device rename
- Power off
Appearance
- Two built-in themes: Fresh & Clean (cyan) and Monochrome, each in Light and Dark
- Material You (Android 12+): colours follow your wallpaper
- Tap the settings icon (top right) to switch themes
System Integration
- Persistent foreground notification — connection stays alive when the app is in the background
- Notification actions: ANC toggle · Switch to [next mode] · Power Off
- Mode cycling respects your favourite list
Requirements
- Android 8.0+ (API 26)
- Bose QC Ultra Headphones (2nd Gen) already paired via Android Bluetooth settings
- The Bose app must not be running while this app is active (both hold the RFCOMM channel)
Privacy
No network access. No analytics. No accounts. All communication is local Bluetooth only.
Open Source
Source code: github.com/MadEyez/quietrebellion
Fork of the original aaronsb/bosectl protocol library.
- 授權條款: MIT License
- 問題追蹤系統
- 原始碼
- 建置詮釋資料
- 可重現建置狀態
版本
雖然在下方可選擇下載 APK 檔案，但要留意這樣的安裝方式將不會收到更新通知，是一種較不安全的下載方法。建議您先安裝 F-Droid 用戶端使用。
下載 F-Droid-
arm64-v8ax86_64此版本需要 Android 8.0 或更高的版本。
此套件包由原開發者建置和簽署，並保證與此原始碼 Tarball 保持一致。
-
arm64-v8ax86_64此版本需要 Android 8.0 或更高的版本。
此套件包由原開發者建置和簽署，並保證與此原始碼 Tarball 保持一致。
-
arm64-v8ax86_64此版本需要 Android 8.0 或更高的版本。
此套件包由原開發者建置和簽署，並保證與此原始碼 Tarball 保持一致。
新版本 0.6
- Switch Audio Source: buttons are now greyed out when routing is unavailable, with a clear hint.
- Switch retry logic: the app automatically retries the switch command for ~2 seconds to catch the brief window when both BT streams are active.
- Improved error messages for Multipoint audio source switching.
- Switch retry logic: the app automatically retries the switch command for ~2 seconds to catch the brief window when both BT streams are active.
- Improved error messages for Multipoint audio source switching.
新版本 0.5
- Auto-Reconnect after unexpected Bluetooth disconnects.
- Conservative retry strategy: one quick retry (~2s) and one delayed retry (~10s).
- No auto-reconnect after intentional disconnect actions (Power Off / Pairing Mode).
- Conservative retry strategy: one quick retry (~2s) and one delayed retry (~10s).
- No auto-reconnect after intentional disconnect actions (Power Off / Pairing Mode).