圖標

Gluco Glance

Read your CGM sensor over Bluetooth. Offline, no accounts, no tracking.
新版本 1.0
First release.

Reads the Sibionics GS1 and the Abbott FreeStyle Libre 2 over Bluetooth, several sensors at once, each with its own colour on the graph. Fingerprick calibration, low and high alerts, a daily log, a home screen widget, and everything kept on the phone.
Gluco Glance reads your glucose level straight off a CGM sensor over Bluetooth and shows it: the current number, which way it is heading, and a graph you can scrub through.

NOT A MEDICAL DEVICE. It is not approved by any regulator and has had no clinical testing. A reading here can be wrong, late, or missing. Do not treat a high or a low on the strength of this app alone. Check with your meter, and follow the advice of whoever looks after your diabetes.

SENSORS
Sibionics GS1, found on its own with nothing to pair.
Abbott FreeStyle Libre 2 and 2 Plus, European models, paired with one NFC tap.
You can run several at once, and every sensor you have worn keeps its own colour and its own line on the graph.

WHAT IT DOES
Dashboard with the reading, the trend, how long the sensor has left, and a graph you can pinch between 3, 6, 12 and 24 hours.
Daily Log for meals, notes and moods, each carrying what the sensor said at that moment.
Calibration from a fingerprick, so readings slide between pricks as the sensor drifts.
Alerts, where a low breaks through a silenced phone and a high does not.
A home screen widget and a permanent notification, so you do not have to open the app to use it.

PRIVACY
The app has no INTERNET permission, so it cannot send your data anywhere. Android enforces that, you do not have to take my word for it. No cloud backup, no analytics, no crash reporting, no adverts, no accounts. It ships with no third-party libraries at all.

Sibionics, FreeStyle and Libre are trademarks of their owners. This project is not affiliated with or endorsed by Sibionics or Abbott.

版本

雖然在下方可選擇下載 APK 檔案,但要留意這樣的安裝方式將不會收到更新通知,是一種較不安全的下載方法。建議您先安裝 F-Droid 用戶端使用。

下載 F-Droid
  • 版本 1.0 (1) 建議 於 2026 年 9 月 20 日新增

    此版本需要 Android 6.0 或更高的版本。

    此套件包由原開發者建置和簽署,並保證與此原始碼 Tarball 保持一致。

    權限
    • 僅可在前景中取得精確位置
      只有在你使用時,這個應用程式才能透過定位服務取得你的精確位置。你必須在裝置上開啟定位服務,這個應用程式才能取得位置資訊。這麼做可能會增加電池用量。
    • 與藍牙裝置配對
      允許應用程式查看手機的藍牙設定,以及建立和接受與其他配對裝置的連線。
    • 存取藍牙設定
      允許應用程式設定本機藍牙手機,以及搜尋遠端裝置並配對連線。
    • 與已配對的藍牙裝置連線
      允許應用程式與已配對的藍牙裝置連線
    • 探索鄰近藍牙裝置並進行配對
      允許應用程式探索鄰近藍牙裝置並進行配對
    • 執行前景服務
      允許應用程式使用前景服務。
    • 搭配「connectedDevice」類型執行前景服務
      允許應用程式搭配「connectedDevice」類型使用前景服務
    • 控制近距離無線通訊
      允許應用程式與近距離無線通訊 (NFC) 電子感應標籤、卡片及感應器進行通訊。
    • 顯示通知
      允許應用程式顯示通知
    • 啟動時執行
      允許應用程式在系統完成開機程序後立刻自行啟動。這會增加手機的開機時間,而且會因為系統一直執行該應用程式導致手機的整體運作速度變慢。
    • 要求忽略電池效能最佳化
      允許應用程式要求權限,以便忽略針對該應用程式的電池效能最佳化設定。
    • 控制震動
      允許應用程式控制震動。
    • 防止手機休眠
      允許應用程式防止手機進入休眠狀態。

    下載 APK 209 KiB PGP 簽章 | 建置紀錄