MorseLightCrypt
Morse code by flashlight and camera, optionally encrypted. No network.
新版本 1.0.1
The Receive and Decrypt tabs no longer ask for the camera before a received message can be typed in by hand.
Send text as Morse code with the flashlight and read it back with the camera, optionally encrypted with a master password.
One phone flashes, another one points its camera at the light and turns the pulses back into text. It also reads any other blinking light: a lamp, a screen, a torch in the distance.
The receiver follows only what blinks, so a bright screen next to the lamp does not blind it. It measures the sender's speed by itself, tolerates a hand holding the phone and pauses while the phone moves.
No network permission: nothing leaves the phone except light. Nothing is stored.
Sending needs a phone with a flashlight; receiving needs a camera.
One phone flashes, another one points its camera at the light and turns the pulses back into text. It also reads any other blinking light: a lamp, a screen, a torch in the distance.
- Send: type, pick the speed, flash. Repeat in a loop so the receiver has time to get settled.
- Receive: aim and press Start. Pinch to zoom on distant lights. Each repeat lands on its own line, and the received text can be edited by hand.
- Encrypt / Decrypt: AES-256 with a master password, in a compact format of letters and digits made for Morse: "HOLA MUNDO" becomes 26 characters.
The receiver follows only what blinks, so a bright screen next to the lamp does not blind it. It measures the sender's speed by itself, tolerates a hand holding the phone and pauses while the phone moves.
No network permission: nothing leaves the phone except light. Nothing is stored.
Sending needs a phone with a flashlight; receiving needs a camera.
捐助
版本
雖然在下方可選擇下載 APK 檔案，但要留意這樣的安裝方式將不會收到更新通知，是一種較不安全的下載方法。建議您先安裝 F-Droid 用戶端使用。
下載 F-Droid-
arm64-v8aarmeabi-v7ax86x86_64此版本需要 Android 8.0 或更高的版本。
此套件包由原開發者建置和簽署，並保證與此原始碼 Tarball 保持一致。