USB-Dataloggerreader
Interface to USB dataloggers.
新版本 1.12-59
* Fix problems with different Anroid versions:
** Android 12 crash fix when App was opened without a logger connected.
** Android 12 crash fix when App was opened without a logger connected.
This app allows to use external USB data loggers together with your tablet computer or smartphone. It implements an interface to temperature, humidity, pressure, sound, voltage, current and or CO-gas concentrations USB dataloggers. (It is supposed to run only on tablet computers and smartphones, which have a USB-(Host)-connection/plug. Android versions >3.1)
It implements following functions:
* Configuration of the logger,
* readout of the configuration,
* Start and Stop of the logging,
* Readout of the measurement data,
* Preview the data in a plot,
* save the data into a file (.csv, .xml or ASCII).
* examine the data in a table or in an interactive plot.
Following datalogger devices are supported:
* Voltcraft DL-120-TH, DL-100-T
* Voltcraft DL-121-TH, DL-101-T, DL-181-THP
* Voltcraft DL-141-TH (experimental)
* Voltcraft DL-200T, DL-210TH, DL-220THP, DL-230L, DL-240K (new)
* LOG32
* Lascar EL-USB-1,2,3,4
* USB500 Series
* FreeTec NC7004-675 black, KG100 (experimental)
* FreeTec NC7004-675 white, ecowitt DS102 (new)
* maybe others (not tested).
It implements following functions:
* Configuration of the logger,
* readout of the configuration,
* Start and Stop of the logging,
* Readout of the measurement data,
* Preview the data in a plot,
* save the data into a file (.csv, .xml or ASCII).
* examine the data in a table or in an interactive plot.
Following datalogger devices are supported:
* Voltcraft DL-120-TH, DL-100-T
* Voltcraft DL-121-TH, DL-101-T, DL-181-THP
* Voltcraft DL-141-TH (experimental)
* Voltcraft DL-200T, DL-210TH, DL-220THP, DL-230L, DL-240K (new)
* LOG32
* Lascar EL-USB-1,2,3,4
* USB500 Series
* FreeTec NC7004-675 black, KG100 (experimental)
* FreeTec NC7004-675 white, ecowitt DS102 (new)
* maybe others (not tested).
- 作者: Markus Hoffmann
- 授權條款: GNU General Public License v2.0 or later
- 問題追蹤系統
- 原始碼
- 構建中介資料
- 可重現構建狀態
版本
雖然在下方可選擇下載 APK 檔案,但要留意這樣的安裝方式將不會收到更新通知,是一種較不安全的下載方法。建議您先安裝 F-Droid 用戶端使用。
下載 F-Droid-
此版本需要 Android 3.1 或更高的版本。
此套件包由 F-Droid 構建和簽署,並保證與此原始碼 Tarball 保持一致。
-
此版本需要 Android 3.1 或更高的版本。
此套件包由 F-Droid 構建和簽署,並保證與此原始碼 Tarball 保持一致。
-
此版本需要 Android 3.1 或更高的版本。
此套件包由 F-Droid 構建和簽署,並保證與此原始碼 Tarball 保持一致。
新版本 1.12-58
* Start to fix problems with different Anroid versions:
** DL-2xx Logger are not detected anymore automatically Android >10 (maybe done)
** Permisssion problem with Android >=5.1 for direct USB access.
** DL-2xx Logger are not detected anymore automatically Android >10 (maybe done)
** Permisssion problem with Android >=5.1 for direct USB access.
新版本 1.12-57
* Improved: support for Voltcraft DL-1??-*
* Start to fix problems with Anroid 10:
** DL-2xx Logger are not detected anymore automatically
* Start to fix problems with Anroid 10:
** DL-2xx Logger are not detected anymore automatically












