New in version 0.11.0
Mirror, auto-rotate and manual rotation settings are now remembered across sessions and app launches.
Otoscope is a clean, ad-free replacement for the proprietary apps shipped with cheap Wi-Fi otoscope cameras.
The stock companion apps generally bundle lots of ad and analytics SDKs (AdMob, AppLovin, IronSource, MBridge, Vungle, Pangle, Mintegral, etc.) and in-app tracking.
Otoscope reimplements essential connection and viewer functionalities, with nothing else.
Features:
• Discover the camera over Bluetooth Low Energy or Wi-Fi.
• Join the camera's Wi-Fi access point in a one-process scope, so the rest of your traffic isn't affected.
• Live video stream, decoded in-app over the camera's protocol (UDP or RTSP). Pure Kotlin, no FFmpeg, no native blobs.
• Auto-rotation driven by the camera's on-board accelerometer / gyro.
• Horizontal-mirror toggle for self-examination.
• Circular mask matching the otoscope lens.
• Photo and video capture with a built-in gallery to review, share and delete them.
• Optional caption burnt into the corner of each capture to tell what's being recorded.
Supported hardware families:
• Xylla — SSID `Enjoy-XXXXXX` or `JesHome-XXXX`.
• iTiMO — SSID `iTiMO-XXXXXX` or `jetion_XXXX`.
• JEGOAT — SSID `softish-XXXXXX`.
• EarFairy — SSID `Cooleer_XXXXXX`.
• Soulear (i4season) — SSID `Soulear-XXXXX`.
• Y38 — SSID `AIR-ES-XXXXXX`.
Otoscope is GPL-3.0-or-later and contains no third-party trackers, ad SDKs, or proprietary native libraries.
Donate
Versions
Although APK downloads are available below to give you the choice, you should be aware that by installing that way you will not receive update notifications and it's a less secure way to download. We recommend that you install the F-Droid client and use that.
Download F-Droid
-
arm64-v8a
armeabi-v7a
x86
x86_64
This version requires Android 10 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
access approximate location only in the foreground
This app can get your approximate location from location services while the app is in use. Location services for your device must be turned on for the app to get location.
-
access precise location only in the foreground
This app can get your precise location from location services while the app is in use. Location services for your device must be turned on for the app to get location. This may increase battery usage.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
connect to paired Bluetooth devices
Allows the app to connect to paired Bluetooth devices
-
discover and pair nearby Bluetooth devices
Allows the app to discover and pair nearby Bluetooth devices
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
interact with nearby Wi-Fi devices
Allows the app to advertise, connect, and determine the relative position of nearby Wi-Fi devices
-
dev.rubec.otoscope.DYNAMIC_RECEIVER_NOT_EXPORTED_PERMISSION
Download APK
2.4 MiB
PGP Signature
|
Build Log
New in version 0.10.0
Adds support for Y38 otoscopes, which broadcast an open Wi-Fi named `AIR-ES-XXXXXX`.
-
arm64-v8a
armeabi-v7a
x86
x86_64
This version requires Android 10 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
access approximate location only in the foreground
This app can get your approximate location from location services while the app is in use. Location services for your device must be turned on for the app to get location.
-
access precise location only in the foreground
This app can get your precise location from location services while the app is in use. Location services for your device must be turned on for the app to get location. This may increase battery usage.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
connect to paired Bluetooth devices
Allows the app to connect to paired Bluetooth devices
-
discover and pair nearby Bluetooth devices
Allows the app to discover and pair nearby Bluetooth devices
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
interact with nearby Wi-Fi devices
Allows the app to advertise, connect, and determine the relative position of nearby Wi-Fi devices
-
dev.rubec.otoscope.DYNAMIC_RECEIVER_NOT_EXPORTED_PERMISSION
Download APK
2.4 MiB
PGP Signature
|
Build Log
New in version 0.9.0
Adds a fullscreen view and an auto-rotate toggle. When auto-rotate is off, a rotate button next to the fullscreen one turns the image 90° at a time. Ring-light, mirror and auto-rotate now fold away under an "Options" row to keep the camera image as large as possible.
-
arm64-v8a
armeabi-v7a
x86
x86_64
This version requires Android 10 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
access approximate location only in the foreground
This app can get your approximate location from location services while the app is in use. Location services for your device must be turned on for the app to get location.
-
access precise location only in the foreground
This app can get your precise location from location services while the app is in use. Location services for your device must be turned on for the app to get location. This may increase battery usage.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
connect to paired Bluetooth devices
Allows the app to connect to paired Bluetooth devices
-
discover and pair nearby Bluetooth devices
Allows the app to discover and pair nearby Bluetooth devices
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
interact with nearby Wi-Fi devices
Allows the app to advertise, connect, and determine the relative position of nearby Wi-Fi devices
-
dev.rubec.otoscope.DYNAMIC_RECEIVER_NOT_EXPORTED_PERMISSION
Download APK
2.4 MiB
PGP Signature
|
Build Log
